815-578-9145A02B-0168-B012 Power Mate E
FANUC parts >> A02B-0168-B012 Power Mate E
Part Name: Power Mate E
Part Number: A02B-0168-B012
Exchange Price
$1,208
Repair Price
$830
FANUC A02B-0168-B012 Power Mate E Repair & Parts Exchange
Free Phone Support
For help resolving an issue with your A02B-0168-B012 Power Mate E, give us a call for free phone support. Our technicians are standing by to walk you through machine repairs at no cost. If you need professional repairs for your FANUC CNC parts, we'll walk you through the send-in process to minimize downtime. Call us today for free phone support for your FANUC machine.
FANUC CNC Power Supply Repair Services
Get repairs for your A02B-0168-B012 Power Mate E by sending your parts to Tri Star CNC. We always thoroughly inspect, repair and clean your parts before sending them back. To get started, fill out an RMA form and send it along with a contact form. You only pay for the necessary services we perform, so if you part only needed to be cleaned to continue functioning, you'll only be charged for that service. We'll also replace your A02B-0168-B012 Power Mate E when it has reached the end of its lifecycle.
We repair many other FANUC parts as well. View our full list of services:
Field Service
Our send-in repair services are available for all locations within the U.S. Consult our field service map to see whether on-site maintenance for your A02B-0168-B012 Power Mate E is available.
FANUC CNC Power Supply Alarm Codes
Our extensive list of alarm codes should give you a good starting point on diagnosing your FANUC power supply errors. We're happy to walk you through more in-depth processes over the phone and can get you started on the send-in repair process if necessary.
We provide alarm codes for other FANUC parts. View our full list of alarm codes:
| Alarm Code | Message | Description |
|---|---|---|
|
PSM-5.5 to PSM-11 |
The main circuit power module (IPM) has detected an overload, overcurrent, or control supply voltage decrease, overcurrent, or control supply voltage decrease. Internal cooling circuit failure, Overload, Input supply voltage imbalance, IPM failure, or control supply voltage decrease of the power module. |
|
|
PSM-15 to PSM-55 |
Overcurrent flowed into the input of the main circuit. Input supply voltage imbalance, IGBT defective. |
|
|
N/A |
Internal cooling circuit faulty. |
|
|
N/A |
The temperature of the heat sink has risen. |
|
|
N/A |
DC voltage (DC link) has dropped |
|
|
N/A |
The input power supply is abnormal (open phase) or the main circuit capacitor was not recharged within the specified time. |
|
|
N/A |
The input power supply is abnormal (open phase). |
|
|
N/A |
The DC link voltage is abnormally high. |
|
|
N/A |
The offset of the current detection circuit of the main circuit DC link is excessive. |
|
|
PSMR |
The regenerative discharge unit is heated. |
|
|
N/A |
The main circuit power supply has an open phase. |
|
|
N/A |
The DC link voltage is abnormally high. |
|
|
N/A |
An error occurred in internal parameter data transfer processing. |
|
|
N/A |
The frequency of the main circuit input power supply is abnormal. |
|
|
N/A |
The input power supply of the main circuit has an imbalance. |
|
|
N/A |
When the magnetic contactor is turned on, the phase sequence of the power supply cannot be determined. |
|
|
N/A |
Internal cooling circuit faulty. |
|
|
N/A |
ROM is faulty. |
|
|
N/A |
RAM is faulty |
|
|
N/A |
A program is not operating normally. |
|
|
N/A |
The input power supply is abnormal (open phase). |
|
|
N/A |
The temperature of the regenerative resistor has arisen abnormally |
Parts & Repair Warranty Information
Exchange parts and repaired parts include a 1-year warranty. Tri Star CNC, LLC warrants the COMPLETE ASSEMBLY REPAIR – not just the parts and labor.
Call now for FREE phone support